plotPolesAndZeros
importFromFile
operationsOnTransferFunctions
plotBode1
plotBode2
plotBode3
plotBodeFilter2
plotImpulse
plotInital
plotStep
| Name | Description |
|---|---|
| plotPolesAndZeros
| Example for plotting poles and zeros of two transfer functions |
| importFromFile
| Example how to read a transfer function from a matlab file |
| operationsOnTransferFunctions
| Demonstrate the usage of the functions of Modelica_LinearSystems2.TransferFunction |
| plotBode1
| Construct a transfer function and plot the Bode diagram with automatic determination of the frequency range to plot |
| plotBode2
| Construct 2 transfer functions and plot the Bode diagram with automatic determination of the frequency range to plot |
| plotBode3
| Construct 2 transfer functions and plot the Bode diagram with automatic determination of the frequency range to plot |
| plotBodeFilter2
| Show low pass filters of all filter types in one diagram |
| plotImpulse
| Impulse plot example |
| plotInital
| Initial condition plot example |
| plotStep
| Step plot example |
| Name | Description |
|---|---|
| system data definition | |
| systemOnFile | true, if state space system is defined on file |
| fileName | file where numenator n and denominator d are stored |
| coefficients | |
| n | |
| d | |
| Name | Description |
|---|---|
| ok |
| Name | Description |
|---|---|
| ok |
| Name | Description |
|---|---|
| ok |
| Name | Description |
|---|---|
| ok |
| Name | Description |
|---|---|
| ok |
| Name | Description |
|---|---|
| order | Order of filter |
| f_cut | Cut-off frequency [Hz] |
| A_ripple | Pass band ripple for Chebyshev filter (otherwise not used) [dB] |
| f_min | Minimum frequency value [Hz] |
| f_max | Maximum frequency value [Hz] |
| Name | Description |
|---|---|
| ok |
Computes the impulse response of the system tf =1/s^2 + s + 1.
| Name | Description |
|---|---|
| tf |
| Name | Description |
|---|---|
| tf |
Computes the impulse response of the system tf =1/s^2 + s + 1.
| Name | Description |
|---|---|
| tf |